gladeVCP timer error

component time2 "Time on in Hours, Minutes, Seconds with cumulative totals";
description
"""
Time2

When the time2.N.start bit goes true the cycle timer resets and starts
to time2 until time.N.start goes false. If you connect time2.N.start to
halui.is-running as a cycle timer it will reset during a pause. See
the example connections below to keep the timer timing during a pause.

Time2 returns the hours, minutes, and seconds that time2.N.start is true.

The cumulative total is displayed by the second set of pins

Sample pyVCP code to display the hours:minutes:seconds.

<pyvcp>
<hbox>
<label>
<text>"Cycle Time"</text>
<font>("Helvetica",14)</font>
</label>
<u32>
<halpin>"time-hours"</halpin>
<font>("Helvetica",14)</font>
<format>"2d"</format>
</u32>
<label>
<text>":"</text>
<font>("Helvetica",14)</font>
</label>
<u32>
<halpin>"time-minutes"</halpin>
<font>("Helvetica",14)</font>
<format>"2d"</format>
</u32>
<label>
<text>":"</text>
<font>("Helvetica",14)</font>
</label>
<u32>
<halpin>"time-seconds"</halpin>
<font>("Helvetica",14)</font>
<format>"2d"</format>
</u32>
</hbox>

<hbox>
<label>
<text>"Total Time"</text>
<font>("Helvetica",14)</font>
</label>
<u32>
<halpin>"total-time-hours"</halpin>
<font>("Helvetica",14)</font>
<format>"2d"</format>
</u32>
<label>
<text>":"</text>
<font>("Helvetica",14)</font>
</label>
<u32>
<halpin>"total-time-minutes"</halpin>
<font>("Helvetica",14)</font>
<format>"2d"</format>
</u32>
<label>
<text>":"</text>
<font>("Helvetica",14)</font>
</label>
<u32>
<halpin>"total-time-seconds"</halpin>
<font>("Helvetica",14)</font>
<format>"2d"</format>
</u32>
</hbox>
<hbox>
<button>
<halpin>"reset"</halpin>
<text>"Reset Total"</text>
<font>('Fixed',16)</font>
<relief>RAISED</relief>
</button>
</hbox>
</pyvcp>

In your post-gui.hal file you might use the following to connect it up

loadrt time2
loadrt not
addf time2.0 servo-thread
addf not.0 servo-thread
net prog-running not.0.in <= halui.program.is-idle
net cycle-timer time2.0.start <= not.0.out
net cycle-seconds pyvcp.time-seconds <= time2.0.seconds
net cycle-minutes pyvcp.time-minutes <= time2.0.minutes
net cycle-hours pyvcp.time-hours <= time2.0.hours
net total-cycle-seconds pyvcp.total-time-seconds <= time2.0.totalofseconds
net total-cycle-minutes pyvcp.total-time-minutes <= time2.0.totalofminutes
net total-cycle-hours pyvcp.total-time-hours <= time2.0.totalofhours
""";

author "John Thornton (modified by ArcEye)";

license "GPL";

// Input Pins
pin in bit start "Timer On";
pin in bit reset "Reset the cumulative timer";
// Output Pins
pin out u32 seconds "Seconds";
pin out u32 minutes "Minutes";
pin out u32 hours "Hours";

pin out u32 totalofseconds "total-Seconds";
pin out u32 totalofminutes "total-Minutes";
pin out u32 totalofhours "total-Hours";

// Global Variables
variable double totalnsec;
variable int old_start;
variable int totalseconds = 0;
variable int sumtotalseconds = 0;

function _;

;;

#include "rtapi_math.h"

FUNCTION(_)
{

if(reset)
sumtotalseconds = 0;

if(start && !old_start)
{
sumtotalseconds += totalseconds;
totalnsec = 0;
}
if(start)
{
totalnsec = totalnsec + period;
totalseconds = totalnsec * 0.000000001;
seconds = totalseconds % 60;
minutes = (totalseconds / 60) % 60;
hours = (totalseconds / 3600);
totalofseconds = (totalseconds + sumtotalseconds) % 60;
totalofminutes = ((totalseconds +sumtotalseconds) / 60) % 60;
totalofhours = ((totalseconds +sumtotalseconds) / 3600);
}
old_start = start;
}