Work with probe

More
6 years 8 months ago #156877 by Sneaky
Replied by Sneaky on topic Work with probe
Thanks for the prompt response.

If you have a look at my attachment 4 posts above you'll see that it is indeed in caps, and is in the correct section.

Any and all ideas accepted, I will try anything.

Appreciate your input.

Please Log in to join the conversation.

More
6 years 8 months ago #157831 by jirkam
Replied by jirkam on topic Work with probe
Good day.
1) Do you have any experience with "Touch probe Vers PR" vers.by/en/touch-probes/9-vers-pr.html . It works well?
Thanks for rating.

2) Is it possible to set other coordinates for a probe that is not in the spindle in the "Probe Screen"? I want a probe next to the spindle. Thank you

Please Log in to join the conversation.

More
6 years 8 months ago #158703 by andypugh
Replied by andypugh on topic Work with probe
Some review of the Vers probe can be found here:
forum.linuxcnc.org/show-your-stuff/34654-probe-from-vers-by

Please Log in to join the conversation.

More
6 years 8 months ago #158732 by jirkam
Replied by jirkam on topic Work with probe
There I looked.
Thank you.
Jirka

Please Log in to join the conversation.

More
6 years 7 months ago #159801 by COFHAL
Replied by COFHAL on topic Problem with EMBED_TAB probe
When I add in .ini only the tab probe screen, it shows it fine, but when more than one tab is added in the probe screen tab nothing appears.

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
6 years 7 months ago #159874 by andypugh
Replied by andypugh on topic Problem with EMBED_TAB probe
What happens if you change the order of tab loading in the INI file?

Please Log in to join the conversation.

More
6 years 7 months ago #159972 by COFHAL
Replied by COFHAL on topic Problem with EMBED_TAB probe
Nothing happens.

Please Log in to join the conversation.

More
6 years 7 months ago #160005 by andypugh
Replied by andypugh on topic Problem with EMBED_TAB probe
Nothing happens, or the same thing happens?

Please Log in to join the conversation.

More
6 years 7 months ago #160013 by COFHAL
Replied by COFHAL on topic Problem with EMBED_TAB probe
same thing happens

Please Log in to join the conversation.

More
6 years 7 months ago #160026 by andypugh
Replied by andypugh on topic Problem with EMBED_TAB probe
Is it the same with only one additional tab, or does a specific tab seem to cause the problem?

Can we see the INI file?

Please Log in to join the conversation.

Time to create page: 0.209 seconds
Powered by Kunena Forum