G84 without spindle feedback

More
10 years 1 month ago #80782 by andypugh
Replied by andypugh on topic G84 without spindle feedback
I think you need to discuss this on the developers list.

Please Log in to join the conversation.

More
10 years 1 month ago #80784 by clkeck1
Replied by clkeck1 on topic G84 without spindle feedback
There is a feature request open for this since 8/16/12. It would be nice to have it in the standard release by now.

Please Log in to join the conversation.

More
10 years 1 month ago #80786 by terkaa
Replied by terkaa on topic G84 without spindle feedback
Found functions:

DISABLE_FEED_OVERRIDE();
ENABLE_FEED_OVERRIDE();

Tero

Please Log in to join the conversation.

More
10 years 1 month ago #80788 by clkeck1
Replied by clkeck1 on topic G84 without spindle feedback
M49 disables overrides
M48 enables overrides

Please Log in to join the conversation.

More
10 years 1 month ago #80789 by terkaa
Replied by terkaa on topic G84 without spindle feedback
Developers list?? Yes I was amazed that this is not supported G84 & G74 are very basic canned cycles that all CNC-controls need to support. This code seems to work. I will try it tomorrow on real machine.

Tero

Please Log in to join the conversation.

More
10 years 1 month ago #80791 by andypugh
Replied by andypugh on topic G84 without spindle feedback
The developers Mailing List:
www.linuxcnc.org/community/

Please Log in to join the conversation.

More
10 years 1 month ago #80793 by terkaa
Replied by terkaa on topic G84 without spindle feedback
Request sent :)

Please Log in to join the conversation.

More
10 years 1 month ago #80893 by terkaa
Replied by terkaa on topic G84 without spindle feedback
After manually finding correct lines from files here is a working patch for current master that adds G74/G84

personal.inet.fi/koti/ekasorvaus/linuxcnc/g84_g74.diff


Tero

Please Log in to join the conversation.

More
10 years 1 month ago #80914 by andypugh
Replied by andypugh on topic G84 without spindle feedback
Ok, the next step is probably to put that up on Github as a pull request.
But I get a bit unhelpful here, I have never done that, so don't know the process.

Please Log in to join the conversation.

More
10 years 2 weeks ago #81642 by terkaa
Replied by terkaa on topic G84 without spindle feedback
Here is a video of G84 floating tapping:



Seems to work ok.

Tero

Please Log in to join the conversation.

Time to create page: 0.058 seconds
Powered by Kunena Forum