(Solved) Use already connected Buttons twice

Hey Guys,
another day another question...

I want to use my Arrow-Buttons that i use for moving the mill as a shortcut.
I want to press x+ and x- same time to switch to gmoccapy.jog-inc-0-PIN.
I dont have enough buttons to add that separatly.
Can someone give me a hint how i can do that?

i have added the x+ and x- with the following code:

I tried to use and2 but the problem is that the pins are already connected and i cant figure out how i could reuse them later.

Regards, Jan

Just re-use the signals in more "net" commands.

net jogx-plus gmoccapy.jog-x-plus <= lcec.0.2.din-6
net jogx-minus gmoccapy.jog-x-minus <= lcec.0.2.din-1

net jogx-plus => parport.0.pin-57-out (for example)

And note that the => are only for human readability, and invsible to the computer.