Getting error 'NoneType' object has no attribute 'rfind' when Axis starts

rbarry1068
Topic Author
Offline
Junior Member

9 years 7 months ago #89396 by rbarry1068

Getting error 'NoneType' object has no attribute 'rfind' when Axis starts was created by rbarry1068

I am running LinuxCNC 2.7.8. When Axis starts, it looks fine, but I get the error 'NoneType' object has no attribute 'rfind' and can't get a preview of my g-code file. Any Ideas would be welcome.

Please Log in to join the conversation.

dgarrett
Offline
Platinum Member

9 years 7 months ago #89399 by dgarrett

Replied by dgarrett on topic Getting error 'NoneType' object has no attribute 'rfind' when Axis starts

Your ini file has two [RS274NGC] sections one with SUBROUTINE_PATH, one with PARAMETER_FILE

Try using a single [RS274NGC] with both items

Please Log in to join the conversation.

rbarry1068
Topic Author
Offline
Junior Member

9 years 7 months ago #89642 by rbarry1068

Replied by rbarry1068 on topic Getting error 'NoneType' object has no attribute 'rfind' when Axis starts

Thanks. That fixed it.

Please Log in to join the conversation.

Time to create page: 0.076 seconds