Where are Mesa 7i76e physical pins configured?

you shoudt better go with the new realse comming out next ((WEEKS))
that will give you mutch better performence then pathpilot ever had

Yeah, I'm definitely requiring 2.8 now, at least as currently configured. I don't know how long it'll take them to move to 2.8. I do have a gantry machine.

You think they use a hybrid with MachineKit? What makes you think that (I don't know enough about the differences to know how that might be useful)?

pl7i92 wrote: you shoudt better go with the new realse comming out next ((WEEKS))
that will give you mutch better performence then pathpilot ever had

Well, I use PP on two other machines in my shop, and the UI is much nicer than Axis.

JetForMe wrote:
Well, I use PP on two other machines in my shop, and the UI is much nicer than Axis.

There are some interesting developments with GUIs under development. ONce complete, this one will likely be better than Path Pilot. forum.linuxcnc.org/41-guis/34996-another...ect-underway?start=0

You will really will make it very hard for yourself if you attempt to adopt pathpilot on a non tormach machine.

At least get your machine fully functional before going down that rabbit hole

Look at Gmoccappy GUI and also nativecam which give you that conversational style machining.