No Start on Linuxcnc 2.7.14 and 7i76e

6 years 11 months ago #149885 by tommylight

Replied by tommylight on topic No Start on Linuxcnc 2.7.14 and 7i76e

cmorley wrote: ahh yes I see it - thanks

You are welcomed, always.

Please Log in to join the conversation.

6 years 11 months ago #149887 by Todd Zuercher

Replied by Todd Zuercher on topic No Start on Linuxcnc 2.7.14 and 7i76e

You might have better luck starting with the Linuxcnc ISO from here.
www.linuxcnc.org/testing-stretch-rtpreem...tch-uspace-amd64.iso
It is Debian 9 with Linuxcnc already installed.

Please Log in to join the conversation.

6 years 7 months ago #159464 by +Jan+

Replied by +Jan+ on topic No Start on Linuxcnc 2.7.14 and 7i76e

Sorry for the late feedback. You were right, after the reinstallation everything works as desired. Thanks a lot...

Please Log in to join the conversation.

Time to create page: 0.266 seconds