Rotary axis on wrong axis.

More
6 years 4 months ago #171906 by Robban
Rotary axis on wrong axis. was created by Robban
Is there a way to change the a axis to rotate round the long y axis instead of the x axis?
Have converted a lathe to a 4 axis router.
Im using Probe Basic!

Attachment not found


Attachment not found


Attachment not found

Please Log in to join the conversation.

More
6 years 4 months ago #171908 by tommylight
Replied by tommylight on topic Rotary axis on wrong axis.
Yes, set it as B axis in the ini and hal files.
In the ini that has to be changed also in the display and traj section.

Please Log in to join the conversation.

Time to create page: 0.181 seconds
Powered by Kunena Forum