how to cheat carousel component

hello friends, this is my first post, but i'm registered and follow the forum for a long time, i have a problem that has taken my sleep.
I use linuxcnc on a Mazak CNC lathe, with an 8-position hydraulic turret, however, I don't know why, the turret's encoder has 16-positions.
I can work with the machine, using the carousel component, but I can only use the odd tools, if I call an even numbered tool, I have an error and the turret stops between two positions.
I need to find a way to lie to the component like this:

0000 => 0000
0001 => 0001
0010 => 0000
0011 => 0010
0100 => 0000
0101 => 0011
0111 => 0000
1000 => 0100
1001 => 0000
1010 => 0101
1011 => 0000
1100 => 0111
1101 => 0000
1111 => 1000
it looks so easy, but i can't find the solution, i tried using mux16 => conv-s32-u32=>demux, but i got an error when trying to convert s32 to u32, and the demux doesn't accept s32 inputs, and mux16 doesn't has output u32.

if anyone has an idea, i would be very grateful

forgive the bad english.

greetings from Brazil

I use ClassicLadder to control my turret on the Hardinge CHNC.
All my files are on my web site.
gnipsel.com/shop/hardinge/hardinge.xhtml

JT

I'm pretty sure the lut5 component can do what you need.

I think your binary list is missing a few entries
JT

I think this is what you meant...
JT

yes, that was exactly it, I must have gotten involved with the numbers when typing

Thanks! BigJohnT
I managed to solve the problem, changing the sensor type of the carousel from binary to single, and using the 8 demux outputs, 1 for each position of the turret, I'll attach my hal file, it might be interesting for someone who has a 16-position encoder in an 8-position turret