10" 1024 x 600 display with touchscreen

More
2 years 1 week ago #312894 by Guytou
10" 1024 x 600 display with touchscreen was created by Guytou
Hi,
I intend to use Linuxcnc on a Raspberry PI 4 together with a 10" display 1024 x 600 with touchscreen.
Did anyone tried this already?  And which GUI would you recommend ?

Please Log in to join the conversation.

More
2 years 1 week ago #312910 by tommylight
Replied by tommylight on topic 10" 1024 x 600 display with touchscreen
What GUI do you intend to use?
Axis should work, mostly, and there are some made specifically for small screens, like:
www.forum.linuxcnc.org/21-axis/38188-axi...reen-with-qtvcp-tabs
forum.linuxcnc.org/forum/41-guis/26174-s...signs?start=20#61123

Please Log in to join the conversation.

More
2 years 1 week ago #312931 by Guytou
Replied by Guytou on topic 10" 1024 x 600 display with touchscreen
Thanks for the tips.
Does Axis support touch screens ?
I was thinking using Gmocappy.

Please Log in to join the conversation.

More
2 years 1 week ago #312935 by zack
Replied by zack on topic 10" 1024 x 600 display with touchscreen
This version supports touch screens
 

Please Log in to join the conversation.

More
2 years 1 week ago #312982 by Guytou
Replied by Guytou on topic 10" 1024 x 600 display with touchscreen
Gmoccapy support indeed touch screens, but does it support 1024x600 displays?

Please Log in to join the conversation.

Time to create page: 0.078 seconds
Powered by Kunena Forum