YOOcnc

More
4 years 10 months ago #228900 by kiwiphil
YOOcnc was created by kiwiphil
Hi all. I have a yooCNC with the usb interface. Unfortunately i knocked the case fan connection off and cant find where to put it back. It goes somewhere near the 15V pins but the connector is 3 pin and there are only 2 pins available.
Thanks
Phil

Please Log in to join the conversation.

More
4 years 10 months ago #228912 by tommylight
Replied by tommylight on topic YOOcnc
Pictures?

Please Log in to join the conversation.

More
4 years 10 months ago #228950 by kiwiphil
Replied by kiwiphil on topic YOOcnc
Forgot to mention the board is a YOOCNC 450JKB.

Please Log in to join the conversation.

Time to create page: 0.121 seconds
Powered by Kunena Forum