Update:
- mesa card and jogwheels - sold
- keling motors, pico drives, 48VDC supplies - sold
Hi all,
Due to lack of time for this hobby I am selling parts that I planned to use on a lathe project.
If you are interested in multiple items make me an offer and I will estimate shipping based on where you are.
I am in Helsinki Finland (that's in Europe!).
Direct bank-transfer preferred within europe, but paypal is possible also.
The forum does not allow posting of many links, so all images are on one page:
www.dropbox.com/sh/d5gl0ga35zljsdb/AAD_9...Zx1VLwIkrjuub6a?dl=0
thanks!
Anders W
(anders.e.e.wallin "at" gmail.com, or post below, or private message)
[strike]Mesa 6I68 PCI-E with Mesa 3X20 FPGA card.
including 6pcs 4ft ribbon cables and 3pcs DIY BOBs
100 euros or best offer.
Light and easy to ship worldwide.[/strike]
[strike]Jogwheels, TWO, with quadrature A/B/Z outputs.
Model Euchner HKD100V100A05
40euros
old-school model, a bit larger (esp. behind the panel) than more modern ones.[/strike]
Large brushless servo wtih resolver.
Baumuller DSG 56-M 1.75kW 3000rpm 13A 7Nm, with 24VDC brake, resolver
100 euros or best offer
very heavy to ship
Bonmet servodrive. Intended for Baumuller servo but not tested. 1-phase 230VAC input.
Bonmet SA3L10B, including fine-pitch data connector
100euros or best offer.
[strike]Pico systems PWM amplifiers, TWO. "Pico-Systems AC servo amp, rev B, 2007"
Both are mounted to a common heatsink.
100 euros for both, or best offer.
easy to ship without the heatsink.[/strike]
[strike]48VDC 350W powersupplies for 115-230VAC input. suitable for the servo drives. TWO.
bought from ebay, model "MW S-350-48"
50 euros for both, or best offer[/strike]
[strike]Keling NEMA 23 brushless servo motors, TWO.
Model Keling KL23BLS-115, with encoder CUI AMT102
50euros for both, or best offer
quite heavy to ship.
Link:
www.automationtechnologiesinc.com/produc...or/kl23bls-series-11
[/strike]
