teknomotor ATC spindle and some other cnc router and mill items for sale

I am selling a few cnc items I no longer need.

First is a teknomotor ISO30 ATC spindle kit with tooling. This is "new", never run, drive not programmed. It was installed on the machine, but never actually used. its been sitting around a few years, so it has a few scratches and some dust. This is the same spindle spec as an HSD ES915, what you find on a large woodworking machine from biesse or scm. It's not suitable for smaller machines.

I also have the complete indramat ac servo and drive kit from a maho hmc. This includes 4 motors (7kw, 2.5kw, 2.5kw, 1kw) 4 drives, power supply, bleeder.

I have one ball screw from that machine as well. 3210, with nsk support bearings. 20" travel.

I have a set of 4 leadshine closed loop steppers. nema34, 8NM, 120v ac input, includes 5M cables. These are almost new. they were installed and run a little for testing, then removed.

I have 3 parker E-AC stepper drives.

I also have some Xzero parts.

- mini raptor 24" X ballscrew.
- mini raptor 18" extrusion set.
- predator 48" 2525 TBI ball screw
- predator nema34 motor mount.
- mini raptor ball screw nut mounts
- mini raptor ball screw bearing blocks (no bearing included)
- predator Z plate. (used)

Last I have some servos from my brother machines.

Sanyo 750w/1kw 86mm set of 3 from the TC229.
Sanyo 400w / 720w set with 3 in one drive from the TC225. This is the one I had a hard time tuning with linuxcnc. Otherwise, its working perfectly.

Message me if you'd like any of this stuff

where in the world are this items
continent
are there any images available

Oh, that's probably useful Toronto Canada

I have pics of some of the items. Some are in storage still. Just ask about anything and ill take a pic and post it.

The postage to here would cost more than the parts!

depends on the part, some are pretty expensive

Hi
I am interested in your ATC Spindle if you still have it
I am in Sudbury, not to far from you

Thanks
Biggs

long gone, sorry.

crappy
got any other cool stuff left ??

Thanks

lots.
most of the stuff up there I think I still have - the maho servos, the brother tc229 servos. the x tc225 servo. the tc225 drive and all the control parts.

My xzero "ultra" predator frame is for sale. My xzero "ultra" mini raptor frame is available.

Potentially might sell the brother tc225 if you want to do a conversion (just needs new axis drives and servos and the mesa kit and a good scrub).

im sure theres more crap I have. im moving, so im letting anything go that I am not 100% going to use 'soon" to just reduce storage needs.

oh, and lots of bicycle parts... lots... haha