I have 3 variable speed inverters, Yaskawa brand, new condition, no original box. They were wrapped in plastic to avoid dust when I got them.
x2 18.5Kw
x1 15Kw
Note that those are maximum ratings, normally a safety margin should be observed.
Check pictures attached from actually inverters plates.
They work fine with linuxcnc and standard AC motors. I have tested with 400VAC and motors of 7.5Kw with good acceleration and braking times.
Asking only 350€ for 15Kw and 375€ for the 18.5Kw model - this is a barging !
