I have the possibility to distribute Raspberry Pi hardware in Europe but I am unsure about the demand for them.
How many of you use it? If I see that the demand is worth, I probably make some stock.
I mean, raspberries are available from many places and I can pick one up within 1/4 hour if needed. Mesa equipment is a whole other story, it takes some planning to get it.
Hakan wrote: I mean, raspberries are available from many places and I can pick one up within 1/4 hour if needed. Mesa equipment is a whole other story, it takes some planning to get it.
not quite true....
ordered 7i76e from eusurplus Sunday afternoon, delivered Tuesday afternoon via DHL..... it would have been the same for a raspberry pi.... essential next working day
Hakan wrote: I mean, raspberries are available from many places and I can pick one up within 1/4 hour if needed. Mesa equipment is a whole other story, it takes some planning to get it.
not quite true....
ordered 7i76e from eusurplus Sunday afternoon, delivered Tuesday afternoon via DHL..... it would have been the same for a raspberry pi.... essential next working day
So the question would be if you would like to receive the Rasberrie together from the same distributor (EuSurplus).
By the way, more 7i76E are expected to be shipped next week from mesa.
Well, I finally ended my agreement with raspberry and will soon have stock.
I will probably only stock the Raspberry Pi 4, model B with 4Gb RAM at less than 50€
I would like to ask the linuxcnc audience if other products are recommended to have stock so that the final user can get a full solution for motion applications using mesa + raspberry. I will listen to you and finalize my order to raspberry foundation based on the feedback received.
