Bay Area consultant familiar with ProBotix/LinuxCNC

More
7 months 2 days ago #344895 by agrimani
Bay Area consultant familiar with ProBotix/LinuxCNC was created by agrimani
Am looking for some help to get a simple ProBotix-based small-format router up and running. Our office is in Novato, CA, 30 minutes north of San Francisco.
Please post any offers here, and we take the conversation off line.
Thanks!

Please Log in to join the conversation.

More
7 months 20 hours ago #344946 by andypugh
Replied by andypugh on topic Bay Area consultant familiar with ProBotix/LinuxCNC
I don't think they do consultancy, but you are very close to the Mesa Electronics HQ.

Please Log in to join the conversation.

More
7 months 10 hours ago #344975 by PCW
Replied by PCW on topic Bay Area consultant familiar with ProBotix/LinuxCNC
Just asking specific questions on the forum may be enough to get you going.

 

Please Log in to join the conversation.

More
6 months 2 weeks ago #345576 by agrimani
Replied by agrimani on topic Bay Area consultant familiar with ProBotix/LinuxCNC
Thanks; am really looking for someone I can pay to configure this system, then help with programing of the router to make a number of parts.

Please Log in to join the conversation.

Time to create page: 0.073 seconds
Powered by Kunena Forum