VNCserver or XRDP. Problem.

More
11 years 2 weeks ago #63803 by exxo
VNCserver or XRDP. Problem. was created by exxo
Hi. I installed LinuxCNC2.6 and it works, but I have a problem with the vncserver or XRDP. After logging into the vncserver application LinuxCNC not working.
paste screenshot:

Attachment not found



Please help.

Please Log in to join the conversation.

More
11 years 2 weeks ago #63805 by cncbasher
Replied by cncbasher on topic VNCserver or XRDP. Problem.
check the link shown and make sure you have 20480 ( i have mine at 30000 )
your running low on memory .

Please Log in to join the conversation.

More
11 years 2 weeks ago #63807 by exxo
Replied by exxo on topic VNCserver or XRDP. Problem.
did not help

Please Log in to join the conversation.

Time to create page: 6.134 seconds
Powered by Kunena Forum