NGCGUI - metric mode? [Solved]

Transistor
Topic Author
Offline
Junior Member

10 years 2 months ago #78710 by Transistor

NGCGUI - metric mode? [Solved] was created by Transistor

I'm working my way through my NGCGUI problems. The latest is that I find that it defaults to quaint inch measurements.

Is there a quick way to fix this? The answer is probably buried in this 33 page thread but l can't find it.

Please Log in to join the conversation.

Rick G
Offline
Platinum Member

10 years 2 months ago #78723 by Rick G

Replied by Rick G on topic NGCGUI - metric mode?

quaint ?

linuxcnc.org/docs/html/gui/ngcgui.html

Code:

NGCGUI_PREAMBLE = in_std.ngc - the preamble file to be added in front of the subroutines. When concatenating several common subroutine invocations, this preamble is only added once. For mm-based machines, use mm_std.ngc

Some of the subs examples are metric. In most case if you use a preamble and then just edit the sub for the unit you want.

Rick G

Please Log in to join the conversation.

Transistor
Topic Author
Offline
Junior Member

10 years 2 months ago #78735 by Transistor

Replied by Transistor on topic NGCGUI - metric mode? [Solved]

That's what I needed.

Thank you.

Please Log in to join the conversation.

Time to create page: 0.296 seconds