New install LixuxCNC with Sheetcam

More
10 years 1 week ago #81824 by kalio
New install LixuxCNC with Sheetcam was created by kalio
Hi all

I have a problem with installing sheecam'a
for the pure version of Debian Wheezy LInuxCNC can not install Sheetcam
missing during the installation libraries libc6 version 2.15
Do you have any advice on this?

Please Log in to join the conversation.

More
10 years 1 week ago #81880 by lincamx
Replied by lincamx on topic New install LixuxCNC with Sheetcam
You can get libc6 2.19 from Debian jessie non-free repo.

That is how I was able to install sheetcam

Please Log in to join the conversation.

Time to create page: 0.098 seconds
Powered by Kunena Forum