Complete HOW-TO Linux Mint 18.1 32/64 RTAI or PREEMPT with RIP install or deb

Probamo,

You need to go into options in the terminal. Then select unlimited buffer. Attach the entire session as a text file so I can see the entire build process and your commands.

Run a make clean in the source code directory prior to attempting another build. Anytime you have a failed build wether a program or kernel; you must run a make clean to remove the previous configuration.

Please attach as a text file. Don't just paste here in the forum because it will be quite long. Go through the entire process again.

Check build dependencies prior then;
Run these in the source directory.

make[2]: Entering directory '/usr/src/linux-headers-3.4-9-rtai-686-pae'
CC [M] /home/dejan/linuxcnc-dev/src/emc/kinematics/5axiskins.o
/usr/src/linux-headers-3.4-9-common-rtai/scripts/Makefile.build:307: recipe for target '/home/dejan/linuxcnc-dev/src/emc/kinematics/5axiskins.o' failed

EDIT: Did you install the 3.4.9 kernel headers?

Hereafter are two files. One related building kernel, the other one git linuxcnc according to Post 3. The same termination occurred

probamo,

Do this please: Only run these commands one time - do not repeat them.

1)Delete linuxcnc-dev folder and everything inside of it

2)Reboot the machine

3)Open a new terminal and issue these commands from your home folder:

4)
5)Do nothing else and post the txt file like you did before.

6) Post the image file of your sources listed in synaptic package manager. You have multiple entries listed in there; should only have one "deb linuxcnc.org/ precise base 2.7-rtai"

@cncnoob

here are the files according to last recommendation. I deleted linuxcnc-dev, rebooted system, use recommended commands in Terminal.

Thanks!

Please open a new terminal and post the output as before. Do not do anything else. We have to trouble shoot what's going on here

Now remove the additional repository you have there. *delete it* (Kernel listing)

Execute these one at a time please.
Then inside the linuxcnc-dev/src directory execute:

Made the first set of commands. Enclosed is outcome. Now I am running the second set of commands and coma back as soon as process is finished.

This is on your currently running pc right? Not a Virtual machine?

No on Virtual machine. I am on PC LMint 18.1 MATE, recently upgraded from 17.3. Does make any change if I would be in Cinnamon? With RTAI kernel in place, Cinnamon was not able to be loaded fully, but reporting an error. With Mate in place, no error was reported with mention kernel!

Terminated again

I have not tested this on Cinnamon but should work for you. I had trouble on a VM. I would suggest that we do not build a deb in that case. If: this build fails, lets see if we can do a RIP on it.

I do not believe it will be successful on a VM. But if you want to try it again Install a clean version of 18.1 x32. Then try the process again.