LinuxCNC on Debian Stretch

More
9 years 4 months ago #95000 by skunkworks
Replied by skunkworks on topic LinuxCNC on Debian Stretch
I am just a messenger.. But will pass along the praise :)

sam

Please Log in to join the conversation.

More
9 years 4 months ago #95002 by tecno
Replied by tecno on topic LinuxCNC on Debian Stretch
Need some help here.

did install via netinst CD image (i386) ( swedish install)

how do I get LinuxCNC-uspace installed? sudo apt-get install linuxcnc-uspace = cannot find package

Please Log in to join the conversation.

More
9 years 4 months ago #95003 by grump
Replied by grump on topic LinuxCNC on Debian Stretch
Add the jessy repository to /etc/apt/sources .list and update.

Please Log in to join the conversation.

More
9 years 4 months ago #95005 by grump
Replied by grump on topic LinuxCNC on Debian Stretch
But did you not download and install the new livecd that Sam has put here?

www.linuxcnc.org/testing-stretch-amd64-rtpreempt/

Please Log in to join the conversation.

More
9 years 4 months ago #95006 by tecno
Replied by tecno on topic LinuxCNC on Debian Stretch
is this for older i386 machine, Hp Elite Book?

Please Log in to join the conversation.

More
9 years 4 months ago #95008 by tecno
Replied by tecno on topic LinuxCNC on Debian Stretch
Found it !

Please Log in to join the conversation.

More
9 years 4 months ago #95009 by grump
Replied by grump on topic LinuxCNC on Debian Stretch
I don't see why not but don't quote me on that.
What harm can trying do?

Please Log in to join the conversation.

More
9 years 4 months ago #95010 by tecno
Replied by tecno on topic LinuxCNC on Debian Stretch
Install is working now, tomorrow install in workshop on milling machine.

Thanks for help

Please Log in to join the conversation.

More
9 years 4 months ago #95011 by grump
Replied by grump on topic LinuxCNC on Debian Stretch
You're welcome, good luck with it.

Please Log in to join the conversation.

More
9 years 3 months ago #96288 by vre
Replied by vre on topic LinuxCNC on Debian Stretch
linuxcnc 2.7.10 works on debian stretch with rtai kernel ?

Please Log in to join the conversation.

Time to create page: 0.065 seconds
Powered by Kunena Forum