usb's not working

Hello,

My old pc stops working so i buy a new one and when installing linuxcnc 2.7.13 my usb ports don't work.

Motherboard: gigabyte h310m ds2

What can i do?

Best Regards,
Marco Gaspar

Can you run:

sudo dmesg | grep usb

and show the output

also try
lsmod

and show the output

hmmmm USB on the H310 chipset may not have support in the kernel supplied with the 2.7.x release of linuxcnc.

According to Intel kernel support starts with 4.14

www.intel.com/content/www/us/en/design/p...lake-s/overview.html

Maybe others can chime in if they have a solution.

I try Linux Mint 18.3 and linuxcnc-stretch-uspace-amd64-r10.iso and they work fine.

Ok maybe there is support with 4.x kernels prior to 4.14.

If you need an rtai kernel rtai-5.1 has support for 4.9.51 & 4.9.80 kernels, but you'd have to patch and build the kernel yourself and build linuxcnc to suit.