- Posts: 3410
- Thank you received: 0
Installing LinuxCNC on Debian 9
8 years 3 months ago #113960
by BigJohnT
Installing LinuxCNC on Debian 9 was created by BigJohnT
Here is the method I use to install LinuxCNC on Debian 9 and setup for using an Ethernet Mesa card.
gnipsel.com/linuxcnc/uspace/debian9-rt.html
gnipsel.com/linuxcnc/uspace/debian9-emc.html
gnipsel.com/linuxcnc/uspace/debian9-eth.html
I've gathered all my instructions into one place for Uspace and various OS's
gnipsel.com/linuxcnc/uspace/
JT
gnipsel.com/linuxcnc/uspace/debian9-rt.html
gnipsel.com/linuxcnc/uspace/debian9-emc.html
gnipsel.com/linuxcnc/uspace/debian9-eth.html
I've gathered all my instructions into one place for Uspace and various OS's
gnipsel.com/linuxcnc/uspace/
JT
Please Log in to join the conversation.
8 years 3 months ago #114024
by Grotius
Replied by Grotius on topic Installing LinuxCNC on Debian 9
Hi John,
Why not cloning a pre configured debian 9 with clonezilla server? clonezilla.org/clonezilla-SE
This saves time.... I only tried the cd clonezilla, this works perfect. 15 minutes ready.
Is this an idea to use?
Why not cloning a pre configured debian 9 with clonezilla server? clonezilla.org/clonezilla-SE
This saves time.... I only tried the cd clonezilla, this works perfect. 15 minutes ready.
Is this an idea to use?
Please Log in to join the conversation.
8 years 3 months ago #114035
by BigJohnT
Replied by BigJohnT on topic Installing LinuxCNC on Debian 9
I guess once you setup the drive cloning it might be a good thing.
JT
JT
Please Log in to join the conversation.
- tommylight
-
- Offline
- Administrator
-
Less
More
- Posts: 22012
- Thank you received: 4
8 years 3 months ago #114044
by tommylight
Replied by tommylight on topic Installing LinuxCNC on Debian 9
Or use "SystemBack" that is very friendly and easy to use.
In some cases you have to uninstall casper and install liveboot, but otherwise it works nicely and can also make an ISO that can be booted from a USB.
In some cases you have to uninstall casper and install liveboot, but otherwise it works nicely and can also make an ISO that can be booted from a USB.
Please Log in to join the conversation.
8 years 2 months ago #115574
by Vitran
Replied by Vitran on topic Installing LinuxCNC on Debian 9
cdimage.debian.org/cdimage/unofficial/no....0-amd64-netinst.iso
This link you provided is only a few days old, but it is giving a 404 Not Found. Where can one find where the disk images are?
This link you provided is only a few days old, but it is giving a 404 Not Found. Where can one find where the disk images are?
Please Log in to join the conversation.
- AnnoyingMutt
- New Member
-
Less
More
- Thank you received: 0
8 years 2 months ago #115593
by AnnoyingMutt
Replied by AnnoyingMutt on topic Installing LinuxCNC on Debian 9
Please Log in to join the conversation.
8 years 2 months ago #115599
by Vitran
Replied by Vitran on topic Installing LinuxCNC on Debian 9
That works, thank you. Yesterday it was providing a 404 when I copied BigJohnT's link no matter what I tried, but I was doing it on a different computer.
Please Log in to join the conversation.
8 years 2 months ago #115605
by BigJohnT
Replied by BigJohnT on topic Installing LinuxCNC on Debian 9
I should have known better than to put the file name in the link... it will change.
JT
JT
Please Log in to join the conversation.
7 years 11 months ago #121076
by Mya2k
Replied by Mya2k on topic Installing LinuxCNC on Debian 9 - Link broken as of 11/20/18
Hello,
The link seems to be broken as of 11/20/18. Please refer to attached image. Also, is it expected that the www.linuxcnc.org domain is down?
Thanks,
Mya
The link seems to be broken as of 11/20/18. Please refer to attached image. Also, is it expected that the www.linuxcnc.org domain is down?
Thanks,
Mya
Please Log in to join the conversation.
7 years 11 months ago #121136
by andypugh
Replied by andypugh on topic Installing LinuxCNC on Debian 9 - Link broken as of 11/20/18
Looks like a problem at your end, both linuxcnc.org and
cdimage.debian.org/cdimage/unofficial/no...-including-firmware/
are working for me.
downforeveryoneorjustme.com can be a useful way to check.
downforeveryoneorjustme.com can be a useful way to check.
Please Log in to join the conversation.
Time to create page: 0.732 seconds
