linuxcnc-2.7-wheezy.iso actually distribution update errors

after installing with linuxcnc-2.7-wheezy.iso only the first part of updates can be downloaded as usual, but further updates fail, so we can not get and install "gedit" e.g.

Will need to see the errors and your sources file.

deb http.debian.net/debian wheezy main contrib non-free
deb-src http.debian.net/debian wheezy main contrib non-free
deb http.debian.net/debian wheezy-updates main contrib non-free
deb-src http.debian.net/debian wheezy-updates main contrib non-free
deb security.debian.org/ wheezy/updates main contrib non-free
deb-src security.debian.org/ wheezy/updates main contrib non-free

ping to server is ok but something in the mirror may be not good?

Your mirrors specifically "http.debian.net" are wrong.

Check this list out and make your choice.
www.debian.org/mirror/list

if you do a new install consider to use Uspace
from here
www.linuxcnc.org/testing-stretch-rtpreempt/

thank you, it is good to know, know it is updating again without errors!

(from linuxcnc-2.7-wheezy.iso it was installed in january 2019 - the sources.list has been created automatically and until march 2019 it worked a lot of times without this errors)

thank you - next time I would like to try it out this way!

just done: Live/Install for Debian Stretch, RT-PREEMPT, LinuxCNC 2.7.x
www.linuxcnc.org/testing-stretch-rtpreem...uspace-amd64-r13.iso
works fine including use of samba

then installed CamPY for LinuxCNC - Camera Edge Finder
all works fine - also In the terminal when typed: qv4l2 opens a new window to test the camera.
but then makes error with script:

sudo python CamPY_setup.py
Traceback (most recent call last):
File "CamPY_setup.py", line 23, in <module>
import apt
ImportError: No module named apt

Hi partec,

i am running into the same problem, my update manager is giving me errors as well (freshly installed linuxcnc). Is it possible for you to post your working sources.list as a starting point for changing it to the german mirrors?
That would be great!
I actually want to work with mesa cards and need the uspace package installed, which is making problems as long as the packages are not found...

i will certainly try the "prepackaged" uspace version, mentioned before!

Thanks a lot, have a great day,

Tobi

Tobi, exactly as annoyingmutt wrote to us above, we can
check this list out and make our choice.

www.debian.org/mirror/list


Also exactly as pl7i92 wrote to us above, it's fine to
do a new install under use Uspace from here

www.linuxcnc.org/testing-stretch-rtpreempt/

Those mirrors don't have Wheezy as it was moved to archive mirror.
It's needed to change them to archive.debian.org/debian/
Still it only has wheezy, but not wheezy-updates and secuirty.