HolgerT wrote: Hi,
as TKR confirms my fears about usage of RT-PREEMPT and AnnoyingMutt shared links to wheezy sources,
so I'll use wheezy with edited /etc/apt/sources.list (attached the edited list - unzip before use). This works fine.
To get it working give the commands (in terminal):
Code:
cd /path/to/your/new/sources.list
sudo mv /etc/apt/sources.list /etc/apt/sources.list.orig
sudo cp sources.list /etc/apt/sources.list
cat /etc/apt/sources.list
sudo apt-get -o Acquire::Check-Valid-Until=false update
Check-Valid-Until=false is needed, because some release file has been expired.
br
Holger
i think this is in the correct path to solution, but i have a lots of errors on updating.
somewhere i read that one has to make the Check persistent doing:
sudo "your preferred editor" /etc/apt/apt.conf
add a line to it (if apt.conf is not present this will create one)
LINE
Acquire::Check-Valid-Until "0";
LINE
after that
sudo apt-get -o Acquire::Check-Valid-Until=false update
sudo apt-get update
my actual sources.list look like this
deb
archive.debian.org/debian/
wheezy main non-free contrib
deb-src
archive.debian.org/debian/
wheezy main non-free contrib
deb
archive.debian.org/debian-security/
wheezy/updates main non-free contrib
deb-src
archive.debian.org/debian-security/
wheezy/updates main non-free contrib
# wheezy-backports
#deb
ftp.us.debian.org/debian/
wheezy-backports main contrib non-free
#deb-src
ftp.us.debian.org/debian/
wheezy-backports main contrib non-free
The wheezy backports was used to install mate desktop, i have to comment it not knowing how to do it right ;(((
regards rick
