CamPy

7 years 6 months ago #130155 by partec

Debian Stretch Tricks, Info & Resources was created by partec

www.linuxcnc.org/testing-stretch-rtpreem...uspace-amd64-r13.iso
installed for simple use with axis:

CamPY Camera Edge Finder works fine but the final install script

sudo python CamPY_setup.py

comes up with error
import apt in line 23

Please Log in to join the conversation.

7 years 6 months ago #130696 by nicbit

Replied by nicbit on topic Debian Stretch Tricks, Info & Resources

Please install python-apt using the command:
sudo apt install python-apt
I had the same problem but now the camera is working Ok.
Regards,

Please Log in to join the conversation.

7 years 6 months ago #130703 by partec

Replied by partec on topic Debian Stretch Tricks, Info & Resources

thank you, this works great, perfect

Please Log in to join the conversation.

7 years 6 months ago #130719 by pl7i92

Replied by pl7i92 on topic Debian Stretch Tricks, Info & Resources

this shoudt be in the README at the pycam setup

Please Log in to join the conversation.

Time to create page: 0.075 seconds