From
gnipsel.com/linuxcnc/uspace/debian9-emc.html
Big Thanks to JT for this
Code:
sudo apt-get update
sudo apt-get dist-upgrade
sudo apt-get install dirmngr
sudo apt-get install software-properties-common
Code:
sudo apt-key adv --keyserver hkp://keys.gnupg.net --recv-key E0EE663E
sudo add-apt-repository "deb http://buildbot.linuxcnc.org/ stretch master-rtpreempt"
Or you can build from git and have Run In Place (RIP) installation that wont replace the 2.7 build included with stretch
Code:
sudo apt-get update
sudo apt-get install linuxcnc-uspace
