(superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation

More
6 years 1 month ago #182866 by ytiuqibu
Replied by ytiuqibu on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
I have managed to download the deb package on this machine where I am connected to the forum so I will try transferring via usb and installing the deb package outside of the terminal

Please Log in to join the conversation.

  • BeagleBrainz
  • New Member
  • New Member
More
6 years 1 month ago #182868 by BeagleBrainz
Replied by BeagleBrainz on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
Why didn't you try the Mint 19.3 with Linuxcnc pre installed ?

Beware that there is some issues with 5.4 and Mesa Ethernet cards.

Please Log in to join the conversation.

More
6 years 1 month ago #182869 by tommylight
Replied by tommylight on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation

BeagleBrainz wrote:
Beware that there is some issues with 5.4 and Mesa Ethernet cards.

What issues ?????????
I have a 7i92 and it works perfectly.

Please Log in to join the conversation.

  • BeagleBrainz
  • New Member
  • New Member
More
6 years 1 month ago #182871 by BeagleBrainz
Replied by BeagleBrainz on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
I've linked to this discussion before.
github.com/LinuxCNC/linuxcnc/issues/927

Tis the reason I've kept to a known stable 4.19.106 kernel.

Remeber when Debian make their RT_PREEMPT kernels they don't have Linuxcnc in mind.

Please Log in to join the conversation.

More
6 years 1 month ago #182878 by rodw
Replied by rodw on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
your http looks malformed. Try http:// ?

Please Log in to join the conversation.

More
6 years 1 month ago #182881 by tommylight
Replied by tommylight on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
I did use 5.4.0 as i was aware that 5.6 had issues.
And 5.4.0 has a bit worse latency than 4.9 on almost all of my PC's and Laptops.

Please Log in to join the conversation.

More
6 years 1 month ago #182882 by tommylight
Replied by tommylight on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation

rodw wrote: your http looks malformed. Try http:// ?

It works for me.

Please Log in to join the conversation.

  • BeagleBrainz
  • New Member
  • New Member
More
6 years 1 month ago #182886 by BeagleBrainz
Replied by BeagleBrainz on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
That's the reason I've been sticking to the 4.19.106 kernel, good latency, nice and stable and had no issues at all whilst running jobs.

Please Log in to join the conversation.

More
6 years 1 month ago #182887 by tommylight
Replied by tommylight on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation

BeagleBrainz wrote: That's the reason I've been sticking to the 4.19.106 kernel, good latency, nice and stable and had no issues at all whilst running jobs.

Just did the same on the original post. :)

Please Log in to join the conversation.

  • BeagleBrainz
  • New Member
  • New Member
More
6 years 1 month ago #182888 by BeagleBrainz
Replied by BeagleBrainz on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
I have the ISO kernels here:

Kernel as used on the 19.3 ISO
cnc.beaglebrainz.net/mintcnc/pool/2.8-rt...t46-lcnc-1_amd64.deb
cnc.beaglebrainz.net/mintcnc/pool/2.8-rt...t46-lcnc-1_amd64.deb

Kernel as used on the 19.2 ISO
cnc.beaglebrainz.net/mintcnc/pool/2.8-rt...t44-lcnc-1_amd64.deb
cnc.beaglebrainz.net/mintcnc/pool/2.8-rt...t44-lcnc-1_amd64.deb

Please Log in to join the conversation.

Time to create page: 0.278 seconds
Powered by Kunena Forum