Any solution for this problem with 2.8pre1 & debian buster ?
( depedencies python-gtksourceview2 & python-vte are not available on buster )
Also when final 2.8 will be released ?
Code:
# cat /etc/debian_version
10.0
Code:
# dpkg -i linuxcnc-uspace_2.8.0~pre1_arm64.deb
Selecting previously unselected package linuxcnc-uspace.
(Reading database ... 179999 files and directories currently installed.)
Preparing to unpack linuxcnc-uspace_2.8.0~pre1_arm64.deb ...
Unpacking linuxcnc-uspace (1:2.8.0~pre1) ...
dpkg: dependency problems prevent configuration of linuxcnc-uspace:
linuxcnc-uspace depends on python-gtksourceview2; however:
Package python-gtksourceview2 is not installed.
linuxcnc-uspace depends on python-vte; however:
Package python-vte is not installed.
dpkg: error processing package linuxcnc-uspace (--install):
dependency problems - leaving unconfigured
Processing triggers for libc-bin (2.28-10) ...
Processing triggers for systemd (241-5) ...
Processing triggers for desktop-file-utils (0.23-4) ...
Processing triggers for mime-support (3.62) ...
Processing triggers for man-db (2.8.5-2) ...
Processing triggers for shared-mime-info (1.10-1) ...
Errors were encountered while processing:
linuxcnc-uspace
Code:
# apt-get install python-gtksourceview2 python-vte
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package python-gtksourceview2 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
Package python-vte is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'python-gtksourceview2' has no installation candidate
E: Package 'python-vte' has no installation candidate
