Hello,
somehow I am reading an reading but probably always the wrong thing.
I managed to finally install it on RASPI4 and on a Notebook with Debian 10 .
test run successfully.
I apologize if this is the wrong part of the community , so please move this thread somewhere it belongs.
I have a 7i76e and would like to start configuration.
Linuxcnc I can start from the console
but not the stepper wizzard or any wizzards and not the hardware wizzard like described here
forum.linuxcnc.org/media/kunena/attachme...uction-ACrewrite.pdf
python stepconf.py
Traceback (most recent call last):
File "stepconf.py", line 40, in <module>
import hal
ImportError: No module named hal
I also tried to install the 7i76e tool which also does not work.
jethornton.github.io/7i76e/install.html
and I get on running 7i76e
~/linuxcnc-dev/src/emc/usr_intf/stepconf$ 7i76e
File "/home/user1/.local/bin/7i76e", line 6
from m7i76e.7i76e import main
^
SyntaxError: invalid syntax
so I got no hal files no ini files nor do I have the machine defined yet.
I am just lost now .... a view dummy tips for me please .... :blush:
I also can't finde the thread anymore where somebody provided his 7i76e configuration files ....
