Hire to Install LinuxCNC + GUI

I tried to install LinuxCNC with Probe Basic but the only thing that works is my stepper movements. I'm willing to pay someone to configure my PC.

Here is what I need:
1. Configure my LinuxCNC to work on my converted CNC
2. Make sure Basic Probe works (with all it functions including probing).

My CNC is very basic so all it has is the stepper motors (which work) and a probing tool (no homing switches or spindle control); but it will be nice that they are pre-configure for future usage.

Thanks for the help!

Hi no need to get payd people !
can you upload your RUNNING Machine Config and also the Start you did with the QTpyvcp

A image of the Machine is good on to understand what you are on to

AND What Operationsystem you installd MINT Debian9
also did you get BUILDBOT to your REPS to get always the newest infos

it is pitty simple to get a nice Screen Running onto a existing basic setup

mendez wrote: I tried to install LinuxCNC with Probe Basic but the only thing that works is my stepper movements. I'm willing to pay someone to configure my PC.

Here is what I need:
1. Configure my LinuxCNC to work on my converted CNC
2. Make sure Basic Probe works (with all it functions including probing).

My CNC is very basic so all it has is the stepper motors (which work) and a probing tool (no homing switches or spindle control); but it will be nice that they are pre-configure for future usage.

Thanks for the help!

If you really want to pay someone to physically come to you for support, you should start with telling us where on this dirty blue marble you are located. if you're lucky there might be someone here who isn't too far from you.