Linuxcnc Mint 19.3 ISO

More
5 years 11 months ago #190416 by hottabich
Replied by hottabich on topic Linuxcnc Mint 19.3 ISO
Thanks for attention! What do you have in the terminal when you start the designer. I have it as a screenshot from the previous post. I installed like this:

Please Log in to join the conversation.

More
5 years 9 months ago #196929 by stefan63
Replied by stefan63 on topic Linuxcnc Mint 19.3 ISO
Link is dead :(
For Mint 19.3 with updated kernel & Official V2.8.0 Linuxcnc:
ISO:

Please Log in to join the conversation.

More
5 years 9 months ago #196931 by tommylight
Replied by tommylight on topic Linuxcnc Mint 19.3 ISO
forum.linuxcnc.org/9-installing-linuxcnc...nd-easy-installation

Please Log in to join the conversation.

More
5 years 9 months ago #196934 by bevins
Replied by bevins on topic Linuxcnc Mint 19.3 ISO

tommylight wrote: forum.linuxcnc.org/9-installing-linuxcnc...nd-easy-installation


This works. I just did one yesterday and one this morning.

Please Log in to join the conversation.

More
5 years 8 months ago #199226 by Superuserg
Replied by Superuserg on topic Linuxcnc Mint 19.3 ISO
All the links are DEAD.....Could someone who has a copy of the Linuxcnc Mint 19.3 ISO upload it to google drive and share the link?

Please Log in to join the conversation.

  • BeagleBrainz
  • Topic Author
  • New Member
  • New Member
More
5 years 8 months ago #199228 by BeagleBrainz
Replied by BeagleBrainz on topic Linuxcnc Mint 19.3 ISO
Not much point in using it, unless you want to compile Linuxcnc every time there is an update.

Best option is to follow Tommy's instructions for Linuxcnc & Mint 19.3, then you can use the official Linuxcnc repos to update.

Please Log in to join the conversation.

More
5 years 5 months ago #208140 by Hippy
Replied by Hippy on topic Linuxcnc Mint 19.3 ISO
Ok, just come across this....Sometime ago i installed this ISO ( i think)of Mint 19.2 w/Linuxcnc and plasmac. It currently works good I dont want to break it, so never update anything?

Please Log in to join the conversation.

More
5 years 5 months ago #208141 by stefan63
Replied by stefan63 on topic Linuxcnc Mint 19.3 ISO
Correct, but it is sometimes hard to resist ;)
If it works as you want only upgrade if you need some new features.

Please Log in to join the conversation.

More
5 years 5 months ago #208157 by tommylight
Replied by tommylight on topic Linuxcnc Mint 19.3 ISO
It should be safe to do
Code:
sudo apt-get update sudo apt-get dist-upgrade
I do this on all my PC's nearly every day, all use Mint 19.3 as i reverted back from 20.1, it had to much issues with Python 3 and LinuxCNC stuff.
Use at your own risk.

Please Log in to join the conversation.

  • BeagleBrainz
  • Topic Author
  • New Member
  • New Member
More
5 years 5 months ago #208168 by BeagleBrainz
Replied by BeagleBrainz on topic Linuxcnc Mint 19.3 ISO
You’ll have to remove the lines that point to my old repo otherwise apt will have a bitch & moan.
Linuxcnc should be able to be updated from the official repos.
If only my brain chemistry could fixed as easily.

Please Log in to join the conversation.

Time to create page: 0.139 seconds
Powered by Kunena Forum