linuxcnc 2.8 not showing up in synaptic

6 years 2 months ago #178465 by phillc54

Replied by phillc54 on topic linuxcnc 2.8 not showing up in synaptic

Just select the version you require:

linuxcnc.org/docs/

Please Log in to join the conversation.

6 years 2 months ago #178566 by GBTig

Replied by GBTig on topic linuxcnc 2.8 not showing up in synaptic

I'm getting a 404 error when I follow the link off the 2.8 docs page to the .iso:

www.linuxcnc.org/iso/linuxcnc-2.8.0-buster.iso

Please Log in to join the conversation.

6 years 2 months ago #178567 by phillc54

Replied by phillc54 on topic linuxcnc 2.8 not showing up in synaptic

It is a work in progress as it is being prepared for the imminent 2.8 release.

This is the latest test version: www.linuxcnc.org/temp/2.8test5.iso

Please Log in to join the conversation.

Time to create page: 0.113 seconds