RPI4 Raspbian 64 bit & LinuxCNC

Donno
Offline
Premium Member

3 years 1 month ago #280389 by Donno

Replied by Donno on topic RPI4 Raspbian 64 bit & LinuxCNC

The username is fixed it boots directly to desktop logged in with cnc,cnc. Can you tell me how to setup gpio driver so i can test i manage to open the sim axis mm config with some ,disabling of pins in the hal file. I only get hal2pi ( github.com/joao404/HAL2PI ) when googling.

Please Log in to join the conversation.

3 years 1 month ago #280390 by Cant do this anymore bye all

Replied by Cant do this anymore bye all on topic RPI4 Raspbian 64 bit & LinuxCNC

linuxcnc.org/docs/devel/html/drivers/hal_gpio.html

Sounds like you can use a parport hal file and replace hal_parport entries with hal_gpio

Please Log in to join the conversation.

rodw
Offline
Platinum Member

3 years 1 month ago #280393 by rodw

Replied by rodw on topic RPI4 Raspbian 64 bit & LinuxCNC

Also in section 7 it says SUBSYSTEM=="bcm2835-gpiomem '.................
Thats probably going to be bcm2711-gpiomem for the Pi 4b

The rules discussed there should ensure the driver is loaded at boot time with the corredt permissions

I think the docs need a bit of love there

Please Log in to join the conversation.

Donno
Offline
Premium Member

3 years 1 month ago #280397 by Donno

Replied by Donno on topic RPI4 Raspbian 64 bit & LinuxCNC

I loaded drivers with

Code:

[code]loadrt hal_gpio inputs=GPIO5,GPIO6,GPIO12,GPIO13,GPIO16,GPIO17,GPIO18,GPIO19 \
                                outputs=GPIO20,GPIO21,GPIO22,GPIO23,GPIO24,GPIO25,GPIO26,GPIO27 \
                                invert=GPIO20,GPIO27 \
                                reset=GPIO21,GPIO22

[/code]

I get no error messages and gpio is as expected but no response :

Attachment not found

I will do step 7 now and see if i can get it working

Please Log in to join the conversation.

Donno
Offline
Premium Member

3 years 1 month ago #280400 by Donno

Replied by Donno on topic RPI4 Raspbian 64 bit & LinuxCNC

Created file 90-gpio-access

Code:

SUBSYSTEM=="bcm2711-gpiomem", GROUP="gpio", MODE="0660" SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660" SUBSYSTEM=="gpio*", PROGRAM="/bin/sh -c '\ chown -R root:gpio /sys/class/gpio && chmod -R 770 /sys/class/gpio;\ chown -R root:gpio /sys/devices/virtual/gpio && chmod -R 770 /sys/devices/virtual/gpio;\ chown -R root:gpio /sys$devpath && chmod -R 770 /sys$devpath\ '"

SUBSYSTEM=="pwm*", PROGRAM="/bin/sh -c '\ chown -R root:gpio /sys/class/pwm && chmod -R 770 /sys/class/pwm;\ chown -R root:gpio /sys/devices/platform/soc/.pwm/pwm/pwmchip && chmod -R 770 /sys/devices/platform/soc/.pwm/pwm/pwmchip\

I am assuming this is a udev rule ???

I done the following :

Code:

sudo groupadd gpio
sudo cp 90-gpio-access /usr/lib/udev/rules.d/
sudo chmod +x /usr/lib/udev/rules.d/90-gpio-access
sudo usermod -aG gpio cnc
reboot

I started linuxcnc in terminal with following output :

Code:

cnc@raspberrypi:~$ /usr/bin/linuxcnc /home/cnc/linuxcnc/configs/sim.axis/axis_mm.ini
LINUXCNC - 2.10.0~pre0
Machine configuration directory is '/home/cnc/linuxcnc/configs/sim.axis'
Machine configuration file is 'axis_mm.ini'
Starting LinuxCNC...
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod
Waiting for component 'tpmod' to become ready.......Waited 3 seconds for master.  giving up.
.Note: Using POSIX realtime

Found file(lib): /usr/share/linuxcnc/hallib/core_sim.hal
Found file(lib): /usr/share/linuxcnc/hallib/sim_spindle_encoder.hal
Found file(lib): /usr/share/linuxcnc/hallib/axis_manualtoolchange.hal
Found file(lib): /usr/share/linuxcnc/hallib/simulated_home.hal
Found file(REL): ./cooling.hal
task: main loop took 0.027656 seconds
task: main loop took 0.019169 seconds
note: MAXV     max: 53.340 units/sec 3200.400 units/min
note: LJOG     max: 53.340 units/sec 3200.400 units/min
note: LJOG default: 30.480 units/sec 1828.800 units/min
note: jog_order='XYZ'
note: jog_invert=set()
task: main loop took 0.012626 seconds
task: main loop took 0.011122 seconds
task: main loop took 0.010243 seconds
task: main loop took 0.012159 seconds
task: main loop took 0.017321 seconds
task: main loop took 0.010607 seconds
task: main loop took 0.011524 seconds
task: main loop took 0.012778 seconds

I am using GPIO 20 for output and GPIO 5 for input, still nothing.

Please Log in to join the conversation.

rodw
Offline
Platinum Member

3 years 1 month ago #280426 by rodw

Replied by rodw on topic RPI4 Raspbian 64 bit & LinuxCNC

I can't really help. We need Andy as he wrote it
I wonder if changing the board was wrong?

I'm just uploading another 2.10 img with the linuxcnc docs in it. Its a 2gb download and 6.9 gb uncompressed
It has not got any gpio changes
drive.google.com/file/d/11FDs7H5EUx2_eSr...VDQ/view?usp=sharing

Please Log in to join the conversation.

andypugh
Offline
Administrator

3 years 1 month ago #280427 by andypugh

Replied by andypugh on topic RPI4 Raspbian 64 bit & LinuxCNC

Does the gpiod driver work outside of LinuxCNC? ie does "gpioinfo" work, and can you set and reset pins with gpioget and gpioset ?

See. for example: wiki.radxa.com/Gpiod

Did you remember to add the hal_gipo read and write functions to a thread?

Please Log in to join the conversation.

3 years 1 month ago #280431 by Cant do this anymore bye all

Replied by Cant do this anymore bye all on topic RPI4 Raspbian 64 bit & LinuxCNC

Maybe it would be an idea to have something like the parallel port tester to begin with.

Please Log in to join the conversation.

rodw
Offline
Platinum Member

3 years 1 month ago #280432 by rodw

Replied by rodw on topic RPI4 Raspbian 64 bit & LinuxCNC

Thanks Andy, after reading the link, the build installs the gpiod-dev package but does not include the gpiod package So it can't be a dependency of linuxcnc-uspace
Try: sudo apt install gpiod

Can the linuxcnc deb build include it as a dependency for ARM64 Architecture?

Please Log in to join the conversation.

3 years 1 month ago #280434 by Cant do this anymore bye all

Replied by Cant do this anymore bye all on topic RPI4 Raspbian 64 bit & LinuxCNC

I was under the impression that if a deb package was built against a certain library dev package that the library package was automatically included as a dependency.

Please Log in to join the conversation.

Time to create page: 0.447 seconds