Is it possible to install LinuxCNC from the buildbot on a Raspberry Pi 4 that has the preempt kernel? I know I can build and install but if you use a buildbot deb you can get updates...
I added the buildbot key with
Code:
sudo apt-key adv --keyserver hkp://keys.gnupg.net --recv-key 3cb9fd148f374fef
Then added add-apt-repository with
Code:
sudo apt install software-properties-common
Then tried to add the debian 10 deb like this
Code:
sudo add-apt-repository "deb http://buildbot.linuxcnc.org/ buster 2.8-rtpreempt"
But got this error
Code:
john@raspberrypi:~ $ sudo add-apt-repository "deb http://buildbot.linuxcnc.org/ buster 2.8-rtpreempt"
Traceback (most recent call last):
File "/usr/bin/add-apt-repository", line 95, in <module>
sp = SoftwareProperties(options=options)
File "/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py", line 109, in __init__
self.reload_sourceslist()
File "/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py", line 599, in reload_sourceslist
self.distro.get_sources(self.sourceslist)
File "/usr/lib/python3/dist-packages/aptsources/distro.py", line 93, in get_sources
(self.id, self.codename))
aptsources.distro.NoDistroTemplateException: Error: could not find a distribution template for Raspbian/buster
Edit: I do see binary-armhf in
buildbot.linuxcnc.org/dists/buster/2.8-rtpreempt/
and I assume that is the Rpi deb...
JT
