Not support for Mesa 7i95 v. 2.8.1

More
5 years 10 months ago #192707 by ut3ge
Not support for Mesa 7i95 v. 2.8.1 was created by ut3ge
Updated to version 2.8.1!
pncconf does not support for Mesa 7i95, 7i97 and 7c80???
Why is it so??? The release says "hostmot2: Add support for Mesa 7i95, 7i97 and 7c80....." .
Maybe not installed correctly?

Please Log in to join the conversation.

More
5 years 10 months ago #192709 by tommylight
Replied by tommylight on topic Not support for Mesa 7i95 v. 2.8.1
That is driver support, Pncconf is a standalone software for making LinuxCNC configs.
forum.linuxcnc.org/27-driver-boards/3789...7i95?start=90#175835

Please Log in to join the conversation.

More
5 years 10 months ago #192747 by ut3ge
Replied by ut3ge on topic Not support for Mesa 7i95 v. 2.8.1
Thank you. I've done everything. I wanted to configure 7i76ed using the HAL file from 7i95.

Please Log in to join the conversation.

Time to create page: 0.142 seconds
Powered by Kunena Forum