Problems with LinuxCNC 2.8.0 Debian 10 Buster PREEMPT-RT

Hi everyone.I have installed LinuxCNC 2.8.0 Debian 10 Buster PREEMPT-RT with the idea of ​​testing and migrating my operational configuration but when I try to start I get the attached error, whether I copy the operational configuration folder or run the Pncconf Wizard.Thank you very much as allways. 

From the error report: you have two of the same axis somewhere, meaning there are two AXIS X, or Y or Z or ...
There can be many joints for one axis, but only one of each axis.

Right, I have dual Y gantry. True as an arrow Tommy, just edit the INI file, delete a Y in "coordinates =" of section [TRAJ] and solved. I do not know what I feel more, if happy or stupid.
Thank you very much mate.

RoberCNC wrote:

I do not know what I feel more, if happy or stupid.

Happy, for sure, we all make mistakes and miss things and ... i just try hard not to make mistakes when wiring electronics, everything else i am OK with mistakes.

You're right, happy, .
What would be the best option to migrate that same configuration to SilverDaragon or Probe_Basic?
I don't know if it can be done directly or if you have to build it little by little, step by step.

No clue, did not have time to use them, got them running when they came out, drooled a bit and moved on .

Start by changing the Display section in the ini file:
display = axis
display = silver_dragon
Probably will require more changes that that, but that is all i recall now.

Yes, thank you, I already see in the documentation that it is not as simple as changing Display, you have to go putting and directing all the subroutines and files. Thank you very much anyway Tommy, already having the axis configuration operational here I will try and modify with time, I think I have done all the wiring well: P.
Greetings.