current master (2.9) building debs error?

robertspark
Topic Author
Offline
Platinum Member

4 years 5 months ago #243922 by robertspark

Replied by robertspark on topic current master (2.9) building debs error?

Well I got SO close!!!!

Installed Python3 probe basic
Installed pyqtvcp converasational

(I've added some images and updated that post on the other thread)

and it's got

ModuleNotFoundError: No module named 'base_op'

when I start the probe basic sim from linuxcnc

so close!

Please Log in to join the conversation.

Gnevko
Offline
Senior Member

4 years 4 months ago #244895 by Gnevko

Replied by Gnevko on topic current master (2.9) building debs error?

The same for me!
Did you find already the solution for "No module named 'base_op'" problem?

Please Log in to join the conversation.

andypugh
Offline
Administrator

4 years 4 months ago #245168 by andypugh

Replied by andypugh on topic current master (2.9) building debs error?

Any idea where it is meant to come from? This feels like it is possibly a dependency unique to ProbBasic. Do other GUIs work?

Please Log in to join the conversation.

mh300
Offline
New Member

4 years 1 month ago #251474 by mh300

Replied by mh300 on topic current master (2.9) building debs error?

I had this exact same issue (just found this thread via Google) and was able to resolve it by installing the python3 branch of the "kcjengr/qtpyvcp.conversational-gcode" repository.

Instead of this command from the documentation:

Code:

pip install git+https://github.com/kcjengr/qtpyvcp.conversational-gcode.git

I did the following:

Code:

git clone https://github.com/kcjengr/qtpyvcp.conversational-gcode
cd qtpyvcp.conversational-gcode
git checkout python3
pip install .

An then I was able to start probe_basic.

Please Log in to join the conversation.

Time to create page: 0.042 seconds