Installing LinuxCNC 2.9 or Master on Linux Mint 21

More
4 years 3 months ago #247667 by Samuelx
Replied by Samuelx on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
Thank you for this easy installation guide. Beginer like me got it up and running.


 

Please Log in to join the conversation.

More
4 years 3 months ago #247669 by scotth
Replied by scotth on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
I spent Sunday installing Mint 21 on the system. Using Tommylight's instructions, everything went fine. It worked so well, I tried it with MX21, and it worked also.
Latency looks ok, no problems with Sim.
Having the extra drivers for Linux helps a lot.

Please Log in to join the conversation.

More
4 years 3 months ago #247916 by ChironFZ16
Replied by ChironFZ16 on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
I miss halcompile,does anyone know how to make this work ? I need this to get my configuration running.
 

Attachment not found

Please Log in to join the conversation.

More
4 years 3 months ago #247985 by mgm
Replied by mgm on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
Maybe that helps
linuxcnc.org/docs/html/hal/comp.html

Please Log in to join the conversation.

More
4 years 3 months ago #248007 by ChironFZ16
Replied by ChironFZ16 on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
Not really, you can't install linuxcnc-dev. I also made a try with Debian Bookworm, there runs halcompile ;)

 

Attachment not found

Please Log in to join the conversation.

More
4 years 3 months ago #248010 by ChironFZ16
Replied by ChironFZ16 on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
I found a solution, git Linuxcnc and then "./configure --with-python=python3 --with-boost-python=boost_python39 --enable-non-distributable=yes" configure it ;)

 

Attachment not found



 

Please Log in to join the conversation.

More
4 years 3 months ago #248018 by JT
Replied by JT on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
I can't seem to figure out how to remove the generic kernal, remove one another one shows up...

JT

Please Log in to join the conversation.

More
4 years 3 months ago #248050 by tommylight
Replied by tommylight on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
JT, use synaptic, slect what you want to move, it will select another to install so say ok but remember what exactly it is istalling, then just uncheck that offending kernel and continue removal.

Please Log in to join the conversation.

More
4 years 3 months ago #248051 by tommylight
Replied by tommylight on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
Dev version

ftp.de.debian.org/debian/pool/main/l/lin...00863908-4_amd64.deb

Can not check, on a cab to airport.

Please Log in to join the conversation.

More
4 years 3 months ago #248070 by JT
Replied by JT on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
I tried that several times and synaptic keeps installing another different generic kernel... it's really strange.

I'm giving Debian 11.4 a whirl to see what it does... it at least recognized my motherboard NIC so that's better than 11.0.

JT

Please Log in to join the conversation.

Time to create page: 0.226 seconds
Powered by Kunena Forum