Network. Nothing happens when I press "Edit connections"

More
4 years 3 months ago #247579 by Kevin_Pawlus
Network. Nothing happens when I press "Edit connections" was created by Kevin_Pawlus
Hi all :)

I just installed LinuxCNC Debian 2.8.2 and I have some difficulties to get the network to function. Internet is working, I'm trying to connect my Mesa 7i94 but nothing happens when I press the button "Edit connections". I've tried restart the computer. 

 

Attachment not found

Please Log in to join the conversation.

More
4 years 3 months ago #247582 by JT
Replied by JT on topic Network. Nothing happens when I press "Edit connections"
gnipsel.com/linuxcnc/uspace/debian9-eth.html

You need to edit /etc/network/interfaces, network managers don't have a clue...

JT

Please Log in to join the conversation.

More
4 years 3 months ago #247675 by Kevin_Pawlus
Replied by Kevin_Pawlus on topic Network. Nothing happens when I press "Edit connections"
I did try that, could not get it to work... 
Maybe should try one more time. 

I edited the connection in network manager lite the pictures. I did also tried the guide on this forum but also no result...
 

Please Log in to join the conversation.

More
4 years 3 months ago #247679 by PCW
Replied by PCW on topic Network. Nothing happens when I press "Edit connections"
Is the 7I94 jumpered for 10.10.10.10 and connected?
What does

ip a

report

Please Log in to join the conversation.

More
4 years 3 months ago #247680 by Kevin_Pawlus
Replied by Kevin_Pawlus on topic Network. Nothing happens when I press "Edit connections"
The board is connected and the jumpers on the Mesa are as default.
 

Attachment not found

Please Log in to join the conversation.

More
4 years 3 months ago #247687 by PCW
Replied by PCW on topic Network. Nothing happens when I press "Edit connections"
Default jumpers would set the 7I94 IP address to 192.168.1.121

Please Log in to join the conversation.

More
4 years 3 months ago #247688 by Kevin_Pawlus
Replied by Kevin_Pawlus on topic Network. Nothing happens when I press "Edit connections"
I changed jumper W5 and it's working now!
Really glad for the help, this problem was annoying to me

Please Log in to join the conversation.

More
4 years 3 months ago #247705 by Kevin_Pawlus
Replied by Kevin_Pawlus on topic Network. Nothing happens when I press "Edit connections"
I cant find 7i94 in pncconf when I try to setup.
Im not sure why.. Can I add 7i94 to pncconf or should I do something else?

Please Log in to join the conversation.

More
4 years 3 months ago #247707 by PCW
Replied by PCW on topic Network. Nothing happens when I press "Edit connections"
pncconf does not support the 7I94 but you should be able to create a configuration for a 7I92
that will work if you change the card name in the ini file

(select the "Use INI substitution for Mesa board names" option)

Please Log in to join the conversation.

More
4 years 3 months ago #247721 by Kevin_Pawlus
Replied by Kevin_Pawlus on topic Network. Nothing happens when I press "Edit connections"
Thanks, I got a little bit further now.
There is several options to choose firmware, I'm not sure which one to use.
It seems like the setup I made using 7i92 and changing the INI file to 7i94 is for stepper motors.
I have an 7i77 analog board connected to my 7i94 and my machine is using +-10v to control the servomotors.

Please Log in to join the conversation.

Time to create page: 0.217 seconds
Powered by Kunena Forum