Installing linuxCNC on Raspberry All-in-one keyboard.

More
4 years 1 month ago #252549 by ekbiker
Installing linuxCNC on Raspberry All-in-one keyboard. was created by ekbiker
I used the image  www.linuxcnc.org/iso/linuxcnc-2.8.1-pi4.zip  and when the Raspberry All-in-one keyboard boots, it doesn't recognize the built in wifi hardware.

Please Log in to join the conversation.

More
4 years 1 month ago #252564 by tommylight
Replied by tommylight on topic Installing linuxCNC on Raspberry All-in-one keyboard.
I thing it is named PI 400, check under the keyboard, there should be a model number.
I do not have one so i can not help further.

Please Log in to join the conversation.

More
4 years 1 month ago #252582 by elovalvo
Replied by elovalvo on topic Installing linuxCNC on Raspberry All-in-one keyboard.
Try the image you find in this link

forum.linuxcnc.org/9-installing-linuxcnc...cnc?start=130#238020

Please Log in to join the conversation.

More
4 years 1 month ago #252724 by ekbiker
Replied by ekbiker on topic Installing linuxCNC on Raspberry All-in-one keyboard.
Correct. It is the Raspberry Pi 400.

Please Log in to join the conversation.

More
4 years 1 month ago #252734 by ekbiker
Replied by ekbiker on topic Installing linuxCNC on Raspberry All-in-one keyboard.
@elovalvo, I tried your link and clicked on "linucnc-2.9.0pre-bullseye_arm64rt.zip" but google drive says, "(error 79 - inappropriate file type or format.)

Please Log in to join the conversation.

More
4 years 1 month ago #252751 by elovalvo
Replied by elovalvo on topic Installing linuxCNC on Raspberry All-in-one keyboard.
Strange, it works for me.
Anyway try with this link
drive.google.com/uc?export=download&id=1...Wx_5OKJco115P56dgIx4

Please Log in to join the conversation.

More
4 years 1 month ago #252759 by ekbiker
Replied by ekbiker on topic Installing linuxCNC on Raspberry All-in-one keyboard.
@elovalvo, Thanks much for providing another link. But, this one gives the same error as well. Very strange!

I'm on a mac right now, let me try it on windows later.

Thanks again!

Please Log in to join the conversation.

More
4 years 1 month ago #252763 by ekbiker
Replied by ekbiker on topic Installing linuxCNC on Raspberry All-in-one keyboard.
@elovalvo, it works on Windows.

Please Log in to join the conversation.

More
4 years 1 week ago #254674 by andypugh
Replied by andypugh on topic Installing linuxCNC on Raspberry All-in-one keyboard.

I used the image  www.linuxcnc.org/iso/linuxcnc-2.8.1-pi4.zip  and when the Raspberry All-in-one keyboard boots, it doesn't recognize the built in wifi hardware.
Odd, I bought a  Pi400 specifically to test that image. But the Pi Foundation do keep changing their hardware. 

 

Please Log in to join the conversation.

Time to create page: 0.766 seconds
Powered by Kunena Forum