Installing from USB stick cant detect CD-ROM

More
4 years 3 weeks ago #253502 by MichalHK
Installing from USB stick cant detect CD-ROM was created by MichalHK
I would like install lcnc from usb stick. Simple download iso use rufus and using USBstick. I can run lcnc live succesfully but if Im start installing, instalator cant detect any CD-ROM and stop. I check every feature in bios but no succes. PC is HP 8300 elite.

Please Log in to join the conversation.

More
4 years 3 weeks ago #253508 by itsme
Replied by itsme on topic Installing from USB stick cant detect CD-ROM
Just unplug and replug the usb stick.
Then rescan for CDROM. This worked for me...

Please Log in to join the conversation.

More
4 years 3 weeks ago #253521 by MichalHK
Replied by MichalHK on topic Installing from USB stick cant detect CD-ROM
For me too. Thanks

Please Log in to join the conversation.

Time to create page: 0.360 seconds
Powered by Kunena Forum