Compiling LinuxCNC

More
3 years 11 months ago #256318 by daiman444
Compiling LinuxCNC was created by daiman444
Hi everyone. attempting to compile 2.9 with any instructions results in an error:
Code:
dh_installdocs --doc-main-package=linuxcnc-uspace --package=linuxcnc-doc-de     install -d debian/linuxcnc-doc-de/usr/share/doc/linuxcnc-doc-de dh_installdocs: error: Cannot find (any matches for) "usr/share/doc/linuxcnc/LinuxCNC_Developer_de.pdf" (tried in ., debian/tmp) make[1]: *** [debian/rules:108: override_dh_installdocs-indep] Error 255 make[1]: exit directory «/home/ddd/linuxcnc-dev» make: *** [debian/rules:38: binary] Ошибка 2 dpkg-buildpackage: Error: fakeroot debian/rules binary subprocess returned exit status 2

Where can I get this file? it is neither in the download directory nor on the github repository itself

Please Log in to join the conversation.

More
3 years 11 months ago #256327 by tommylight
Replied by tommylight on topic Compiling LinuxCNC
Try compiling with no docs/documents, it seems the German is missing.

Please Log in to join the conversation.

More
3 years 11 months ago #256329 by daiman444
Replied by daiman444 on topic Compiling LinuxCNC

Try compiling with no docs/documents, it seems the German is missing.

 
thanks for the hint. I had this idea, but I haven't figured out how to do it yet.

Please Log in to join the conversation.

More
3 years 11 months ago #256333 by tommylight
Replied by tommylight on topic Compiling LinuxCNC
Add --nodocs or --no-docs to the end of the build line.
It should be here somewhere
www.google.com/search?q=compile+nodocs+s...org&aqs=heirloom-srp ..
Sorry, but on the phone.

Please Log in to join the conversation.

More
3 years 11 months ago #256336 by rodw
Replied by rodw on topic Compiling LinuxCNC
Building instructions are here
linuxcnc.org/docs/devel/html/code/building-linuxcnc.html

Where it shows how to build the debs in the debian folder, do this instead
Code:
./configure uspace no-docs
Tos skip building the dos

Please Log in to join the conversation.

More
3 years 11 months ago #256338 by daiman444
Replied by daiman444 on topic Compiling LinuxCNC

Building instructions are here
linuxcnc.org/docs/devel/html/code/building-linuxcnc.html

Where it shows how to build the debs in the debian folder, do this instead
Code:
./configure uspace no-docs Tos skip building the dos
because I'm a noob, I had to work up the courage to get into the configuration script, but it gave me almost no results. your hint worked!

Please Log in to join the conversation.

More
3 years 6 months ago #269625 by tommylight
Replied by tommylight on topic Compiling LinuxCNC
I have "un-sticky" this topic as i see no reason for it to have been set as such.

Please Log in to join the conversation.

More
3 years 6 months ago #269648 by rodw
Replied by rodw on topic Compiling LinuxCNC

I have "un-sticky" this topic as i see no reason for it to have been set as such.
Its good you are looking at relevance Tommy. As time goes on, a lot of the installation stickies are becoming obsolete so could be unstickyed to avoid confusion. Its so dynamic now, I've been keeping my latest techniques in Google Drive docs due to this awful forum editor

Please Log in to join the conversation.

More
3 years 6 months ago #269652 by tommylight
Replied by tommylight on topic Compiling LinuxCNC

Its good you are looking at relevance Tommy.
I always do, or better said, i always try to, a lot.

Please Log in to join the conversation.

Time to create page: 0.153 seconds
Powered by Kunena Forum