Linux CNC Errors when starting gmoccapy

rodw
Offline
Platinum Member

3 years 10 months ago #259426 by rodw

Replied by rodw on topic Linux CNC Errors when starting gmoccapy

Guys, I don't use gmocappy. I can't help here. Its a matter for the gmocappy developers.
I tried a couple of things

I installed python3-pip
then did
pipe install PyOpenGL-accelerate

But it errored with
error: legacy-install-failure
So it must be Python 2 code at a guess.

Log an issue in git

Please Log in to join the conversation.

HansU
Offline
Platinum Member

3 years 10 months ago #259431 by HansU

Replied by HansU on topic Linux CNC Errors when starting gmoccapy

@RyanB now you are at the same point where I am ....

Please Log in to join the conversation.

rodw
Offline
Platinum Member

3 years 10 months ago #259451 by rodw

Replied by rodw on topic Linux CNC Errors when starting gmoccapy

I was thinking that you maysolve the dependncy issue if you cloned the linuxcnc source and did the dependency checks per the Buiding linuxcnc chapter in the docs. you would just want to get the dependencies to see if gmocappy runs then.
Here is a guide I made

Please Log in to join the conversation.

HansU
Offline
Platinum Member

3 years 10 months ago #259454 by HansU

Replied by HansU on topic Linux CNC Errors when starting gmoccapy

Good idea to get the missing dependencies making a detour and try to build from source on that platform.

Please Log in to join the conversation.

HansU
Offline
Platinum Member

3 years 10 months ago #260472 by HansU

Replied by HansU on topic Linux CNC Errors when starting gmoccapy

Installing the dependencies which dpkg-checkbuilddeps gives me, doesn't solve this.
And when I run configure, i get the same problem as in forum.linuxcnc.org/9-installing-linuxcnc...n-issues-on-bookworm :

Warning: Spoiler!

Code:

checking for python3.11... python3.11
checking for main in -lpython3.11... no
checking for main in -lpython3.11m... no
checking for python3.10... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python3.9... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python3.8... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python3.7... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python3.6... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python3.5... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python3.4... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python3.3... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python3.2... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python3.1... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python3.0... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python2.7... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python2.6... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python2.5... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python2.4... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python2.3... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python2.2... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python2.1... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
checking for python... (cached) python3.11
checking for main in -lpython3.11... (cached) no
checking for main in -lpython3.11m... (cached) no
  results of the Python check:
    Binary:      python3.11
    Library:     no
    Include Dir: no
checking for python3.11... /usr/bin/python3.11
checking for python... (cached) /usr/bin/python3.11
checking for a version of Python >= '2.1.0'... yes
checking for the sysconfig Python package... yes
checking for Python include path... -I/usr/include/python3.11
checking for Python library path... -L/usr/lib/x86_64-linux-gnu -lpython3.11
checking for Python site-packages path... /usr/local/lib/python3.11/dist-packages
checking for Python platform specific site-packages path...
checking python extra libraries... -ldl -lm
checking python extra linking flags... -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions
checking consistency of all components of python development environment... no
configure: error: in `/home/cnc/linuxcnc/linuxcnc-2.9/src':
configure: error:
  Could not link test program to Python. Maybe the main Python library has been
  installed in some non-standard library path. If so, pass it to configure,
  via the LIBS environment variable.
  Example: ./configure LIBS="-L/usr/non-standard-path/python/lib"
  ============================================================================
   ERROR!
   You probably have to install the development version of the Python package
   for your distribution.  The exact name of this package varies among them.
  ============================================================================

Please Log in to join the conversation.

Time to create page: 0.043 seconds