Running SIM in VM for QTPlasmaC

More
3 years 9 months ago #262727 by phillc54
Replied by phillc54 on topic Running SIM in VM for QTPlasmaC
One other option is to use VMware Fusion Player which is free, the tools for it don't require building and are already packaged in Debian.
 

Please Log in to join the conversation.

More
3 years 9 months ago #262728 by Doug @ Design8Studio.com
Replied by Doug @ Design8Studio.com on topic Running SIM in VM for QTPlasmaC
Wow, I never heard of this. Will check it out!

Please Log in to join the conversation.

More
3 years 9 months ago #262730 by Doug @ Design8Studio.com
Replied by Doug @ Design8Studio.com on topic Running SIM in VM for QTPlasmaC
So I apparently cannot use the free VMWare Fusion Player option since my MacOS is too old, and they did not have a free Fusion Player option back when their version of Fusion was compatible with my OS. :-|

Please Log in to join the conversation.

More
3 years 9 months ago #262731 by phillc54
Replied by phillc54 on topic Running SIM in VM for QTPlasmaC
☹️
There is also UTM, the only issue I have with it on an Intel Mac is that the VM can't be paused.
  • iOS 14 and macOS 11.3 are the minimum supported systems for UTM v4.x. Please use UTM v3.x for support down to iOS 11 and macOS 11

Please Log in to join the conversation.

More
3 years 9 months ago #262732 by Doug @ Design8Studio.com
Replied by Doug @ Design8Studio.com on topic Running SIM in VM for QTPlasmaC
I'm on MacOS 10.14

Please Log in to join the conversation.

More
3 years 9 months ago #262733 by phillc54
Replied by phillc54 on topic Running SIM in VM for QTPlasmaC
In that case I think your best bet is to boot into the image that works correctly and then go into synaptic and remove every other linux-image.

Please Log in to join the conversation.

More
3 years 9 months ago #262751 by Doug @ Design8Studio.com
Replied by Doug @ Design8Studio.com on topic Running SIM in VM for QTPlasmaC
Will do. Thank you for the awesome advice! Much appreciated!!!

Please Log in to join the conversation.

Time to create page: 0.169 seconds
Powered by Kunena Forum