configure PREFIX issue

Using the latest source from github with the following command line compiles without issue but, fails to place files in the $PREFIX directories.

./configure --disable-build-documentation-translation  --with-realtime=uspace --enable-non-distributable=yes --prefix=$HOME/linuxcnc_rip

Potential bug?

Folks,
Disregard this "issue" as it appears as if the steps that I took were missing the final step #5 as outlined below:

[1] cd ~/dev/linuxcnc/rip/
[2] git pull
[3] ./configure --disable-build-documentation-translation  --with-realtime=uspace --enable-non-distributable=yes --prefix=$HOME/linuxcnc_rip --exec-prefix=$HOME/linuxcnc_rip
[4] make
[5] sudo make install