First I would just like to say thank you for all your work on this and am glad you are getting better.
I would just like to report that I just did a fresh install of LinuxCNC 2.9.2 from (
www.linuxcnc.org/iso/LinuxCNC_2.9.2-amd64.hybrid.iso
) and still experience the raspi-firmware script trying to run during an upgrade of the kernel.
Code:
/etc/kernel/postinst.d/dkms:
dkms: running auto installation service for kernel 6.1.0-17-rt-amd64.
dkms: autoinstall for kernel: 6.1.0-17-rt-amd64.
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-6.1.0-17-rt-amd64
raspi-firmware: missing /boot/firmware, did you forget to mount it?
run-parts: /etc/initramfs/post-update.d//z50-raspi-firmware exited with return code 1
...
Errors were encountered while processing:
# linux-image-6.1.0-17-rt-amd64
# linux-image-rt-amd64
The previous solution of removing it along with purging it from it from the system works and allows the upgrade to complete.
Code:
# rm /etc/{initramfs/post-update.d/,kernel/{postinst.d/,postrm.d/}}z50-raspi-firmware
# apt purge raspi-firmware
I am not sure if the scripts being in the ISO effect it? e.g.
Code:
LinuxCNC_2.9.2-amd64.hybrid.iso\live\filesystem.squashfs\etc\kernel\postinst.d\z50-raspi-firmware
LinuxCNC_2.9.2-amd64.hybrid.iso\live\filesystem.squashfs\etc\initramfs\post-update.d\z50-raspi-firmware
Thank you again!
