LinuxCNC on Raspberry Pi 5

More
2 years 10 months ago #287477 by flyingbrick
Replied by flyingbrick on topic LinuxCNC on Raspberry Pi 5
Hi Cornholio, Stupid question- Lack of I/O support wont affect the 5's ability to run an ethernet card? (I have one on the way, still trying to decide what machine i want to use to drive it) Just my luck that there would be some weird conflict that means its a no-go.

Please Log in to join the conversation.

More
2 years 10 months ago #287481 by Cant do this anymore bye all
Replied by Cant do this anymore bye all on topic LinuxCNC on Raspberry Pi 5
Should be ok.
Haven’t tested it myself.

Please Log in to join the conversation.

More
2 years 10 months ago #287484 by chuckp47
Replied by chuckp47 on topic LinuxCNC on Raspberry Pi 5
It would be great if you could point me to some appropriate build instructions. I can look at the driver.  I'm plenty familiar with building Linux, but I'd love to have a pointer to the exactly correct repos.  I haven't easily found this on this forum yet.

Please Log in to join the conversation.

More
2 years 10 months ago #287491 by Cant do this anymore bye all
Replied by Cant do this anymore bye all on topic LinuxCNC on Raspberry Pi 5
You'll have to dive into the RP1 as the IO has been moved off the BCM2712, the RPi4 had the IO on the BCM2711.

I had a bit of play but decided to move to another setup.

linuxcnc.org/docs/html/code/building-linuxcnc.html

datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf

datasheets.raspberrypi.com/bcm2711/bcm2711-peripherals.pdf

github.com/raspberrypi/utils/tree/master/pinctrl

Please Log in to join the conversation.

More
2 years 10 months ago #287603 by thadwald
Replied by thadwald on topic LinuxCNC on Raspberry Pi 5
rodw post=285989 userid=20660

Well there is an image here crying out for testing. Its based on the official 2.9.1 image for the PI 4B just compiled for the different BCM2112 board.It should work based on cornhlio's comments.

drive.google.com/file/d/1H_q0Ra-27ZDOhqu...x1f/view?usp=sharing

After booting this image, I am greeted by the Debian login screen. What is the username and password?

Please Log in to join the conversation.

More
2 years 10 months ago #287605 by tommylight
Replied by tommylight on topic LinuxCNC on Raspberry Pi 5

After booting this image, I am greeted by the Debian login screen. What is the username and password?
3 pages back on this topic:
forum.linuxcnc.org/9-installing-linuxcnc...pi-5?start=20#285774

Please Log in to join the conversation.

More
2 years 10 months ago #287606 by rodw
Replied by rodw on topic LinuxCNC on Raspberry Pi 5
usr cnc
pw  cnc

Please Log in to join the conversation.

More
2 years 10 months ago #287607 by thadwald
Replied by thadwald on topic LinuxCNC on Raspberry Pi 5
Thanks.
First thing I notice is display is limited to 640 x 480 and I cannot change it via the Display GUI.

Please Log in to join the conversation.

More
2 years 10 months ago #287608 by thadwald
Replied by thadwald on topic LinuxCNC on Raspberry Pi 5
By the way, DigiKey has over 2500 pi5 4GB in stock. $60 plus shipping.

Please Log in to join the conversation.

More
2 years 10 months ago #287609 by Cant do this anymore bye all
Replied by Cant do this anymore bye all on topic LinuxCNC on Raspberry Pi 5
Yep the display is an issue.
I started with downloads.raspberrypi.com/raspios_arm64/...ookworm-arm64.img.xz

Installed XFCE desktop, used the config to use X instead of wayland then built a RT kernel to suit.

Please Log in to join the conversation.

Time to create page: 0.275 seconds
Powered by Kunena Forum