LinuxCNC on Linux Mint Debian Edition 6

More
3 years 2 weeks ago #282714 by tommylight
Replied by tommylight on topic LinuxCNC on Linux Mint Debian Edition 6
Really glad.

Please Log in to join the conversation.

More
2 years 11 months ago #284241 by bkt
Replied by bkt on topic LinuxCNC on Linux Mint Debian Edition 6

www.linuxmint.com/edition.php?id=308
-
Download, install, update, upgrade, then
Code:
sudo apt install linuxcnc-uspace - If you also need development stuff [code]sudo apt install linuxcnc-uspace-dev - If you need mesaflash to flash firmware for Mesa boards [code]sudo apt install mesaflash - Linux Mint Debian Edition was always much slower than the normal Mint, this time it is a bit faster! :) That is a nice surprise, took 9 seconds to boot from Grub Menu to full Desktop on an old Lenovo 93 something, with RT kernel, no less! Me happy! :)
[/code][/code]
 
sorry I got really backwards....but by doing this did I install an rt, preempt or normal kernel?regards

Please Log in to join the conversation.

More
2 years 11 months ago #284242 by tommylight
Replied by tommylight on topic LinuxCNC on Linux Mint Debian Edition 6

Attachment not found

Please Log in to join the conversation.

More
2 years 11 months ago #285935 by bkt
Replied by bkt on topic LinuxCNC on Linux Mint Debian Edition 6

Attachment not found



 
And there area way to install ethercat with apt ... or need the usual dowload of iegh file and install ethercat glue?
regards

Please Log in to join the conversation.

More
2 years 11 months ago #285938 by rodw
Replied by rodw on topic LinuxCNC on Linux Mint Debian Edition 6

 
And there area way to install ethercat with apt ... or need the usual dowload of iegh file and install ethercat glue?
regards

 
Yes, there is as etherlabmaster now maintain their own third party repository which includes the linuxcnc driver.
This is all set up for you in the official debian bookworm version
try this
Code:
echo "Install ethercat repository" sudo mkdir -p /usr/local/share/keyrings/ wget -O- https://build.opensuse.org/projects/science:EtherLab/signing_keys/download?kind=gpg | gpg --dearmor | sudo dd of=/etc/apt/trusted.gpg.d/science_EtherLab.gpg tee -a /etc/apt/sources.list.d/ighvh.sources > /dev/null <<EOT Types: deb Signed-By: /etc/apt/trusted.gpg.d/science_EtherLab.gpg Suites: ./ URIs: http://download.opensuse.org/repositories/science:/EtherLab/Debian_12/ EOT

Then run the apt install commands in my ethercat sticky.

Please Log in to join the conversation.

More
2 years 7 months ago #295511 by bkt
Replied by bkt on topic LinuxCNC on Linux Mint Debian Edition 6
so finally I try to use LMDE 6 .... I have a little bit time .... I try to install new 2.9.2 ..... first problem .... long list of fix broken dependancy ..... but problematic one is these:
Code:
systemd : Depends: libsystemd-shared (= 252.22-1~deb12u1) but version 252.12-1~deb12u1 is about to be installed

think no one appreciate a downgrtade of library .... how can fix these?

Please Log in to join the conversation.

More
2 years 7 months ago #295514 by tommylight
Replied by tommylight on topic LinuxCNC on Linux Mint Debian Edition 6
AFter installing LMDE6:
sudo apt update
sudo apt upgrade
sudo apt install linuxcnc-uspace
That always works, although it does install a bit older build of LinuxCNC.

Please Log in to join the conversation.

More
2 years 7 months ago #295589 by bkt
Replied by bkt on topic LinuxCNC on Linux Mint Debian Edition 6
try to do whay you suggest ... but result was lcnc version 2.9.0 ,,,, that is not desired ....

Please Log in to join the conversation.

More
2 years 7 months ago #295598 by tommylight
Replied by tommylight on topic LinuxCNC on Linux Mint Debian Edition 6
Try one of these, use GDEBI to install or just double click on them.
Do not use DPKG !!!
Also, please report back if any of them works.

linuxcnc.org/dists/bookworm/2.9-uspace/b...pace_2.9.2_amd64.deb

buildbot2.highlab.com/debian/dists/bookw...4c401d6dc0_amd64.deb

Please Log in to join the conversation.

More
2 years 7 months ago #295604 by Cant do this anymore bye all
Replied by Cant do this anymore bye all on topic LinuxCNC on Linux Mint Debian Edition 6
I have a VM running LMDE, was setup for RTAI, removed the RTAI stuff the other night and no issues installing a RT kernel & 2.9.2 uspace.

Please Log in to join the conversation.

Time to create page: 0.137 seconds
Powered by Kunena Forum