linuxcnc 2.9.1 problem

More
2 years 11 months ago #285472 by Artur_1617
linuxcnc 2.9.1 problem was created by Artur_1617
Hi,
I install linuxcnc 2.9.1 version. 
Maked new pncconf mill config with the same name like in 2.8.4 version and copy all files from my 2.8.4 config to 2.9.1 but when start get some error.
 

Attachment not found


 

Attachment not found


 

Please Log in to join the conversation.

More
2 years 11 months ago #285494 by tommylight
Replied by tommylight on topic linuxcnc 2.9.1 problem
Probably looking for those at the wrong folder, edit the ini file to point to the correct folder.

Please Log in to join the conversation.

More
2 years 11 months ago #285508 by Artur_1617
Replied by Artur_1617 on topic linuxcnc 2.9.1 problem
After fresh install we don have  folder /home/.../linuxcnc/nc_files/remap_lib/python-stdglueMust make new configuration Vismach simulator config and stdglue appeared.Now working.Thanks 

 

Attachment not found

Please Log in to join the conversation.

Time to create page: 0.073 seconds
Powered by Kunena Forum